Product Reviews

SmallRig 2066B Adjustable Articulating Magic Arm Review

A 9.8-inch dual ball-head arm for creators who need to position a lightweight monitor, light, or other 1/4-inch threaded accessory.

This article contains affiliate links. We may earn a commission if you buy through them, at no extra cost to you.

The SmallRig Adjustable Articulating Magic Arm review is for camera users who need more freedom to position a monitor, light, or microphone around a rig.

Its 9.8-inch reach, dual 360-degree ball heads, and 1/4-inch screws offer flexible placement, with a weight recommendation that makes payload choice central.

SmallRig 2066B Arm Review Summary

The quick verdict

SmallRig 2066B Adjustable Articulating Magic Arm
4.6/5

1,000+ ratings

Read Amazon Reviews

SmallRig 2066B Adjustable Articulating Magic Arm

A 9.8-inch dual ball-head arm for creators who need to position a lightweight monitor, light, or other 1/4-inch threaded accessory.

  • 9.8-inch articulating arm, model 2066B.
  • Dual ball-head design, with each head adjustable through 360 degrees.
  • 1/4-inch threaded screw on both ends for attaching compatible accessories and supports.
  • Rubber O-ring cushion at the 1/4-inch screw to help protect a monitor and secure the connection.

Pros

  • Dual ball heads give flexibility when aiming a monitor, light, or other small accessory.
  • Matching 1/4-inch screws at both ends suit rigs built around compatible threaded mounts.

Consider before buying

  • The 213 g maximum weight recommendation rules it out for heavier accessories or setups that exceed that limit.
  • The arm requires a suitable 1/4-inch threaded support point; it does not include a clamp or cage.
Read the full review summary

The 2066B is a single articulating arm with a 1/4-inch threaded screw at each end.

That makes it useful when both the support point and accessory accept compatible 1/4-inch connections, such as a camera cage or rail on one side and a monitor or light on the other.

Its two ball heads can rotate through 360 degrees, so it is designed for positioning at varied angles rather than a fixed straight extension.

At 9.8 inches long, it gives more reach than a compact short arm, while the listed maximum weight recommendation is 213 g. That makes it most appropriate for light accessories and setups that stay within that limit.

The rubber cushion around a screw may help protect a monitor surface and improve the connection, but buyers should confirm that their accessory and rig provide the right threaded mounting points.

The buying factors

SmallRig 2066B Arm Scorecard

Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.

8/10

Positioning flexibility

Two 360-degree ball heads allow a broad range of angles for attached gear.

7/10

Mounting compatibility

Both ends use 1/4-inch screws, a useful standard for many camera accessories, but the setup needs compatible threaded points.

8/10

Reach

The 9.8-inch arm offers useful extension for placing an accessory away from its support point.

5/10

Payload fit

The 213 g maximum weight recommendation confines it to relatively light accessories.

7/10

Contact protection

A rubber cushion at the screw is intended to reduce scratching and help tighten a monitor connection.

7/10

Rig simplicity

The arm is a focused single-piece accessory; it does not include a clamp or other support base.

Key Features and Specifications of SmallRig 2066B Arm

  • 9.8-inch articulating arm, model 2066B.
  • Dual ball-head design, with each head adjustable through 360 degrees.
  • 1/4-inch threaded screw on both ends for attaching compatible accessories and supports.
  • Rubber O-ring cushion at the 1/4-inch screw to help protect a monitor and secure the connection.
  • Listed maximum weight recommendation: 213 g.
  • Compatible device types include cameras and monitors.

Pros and Cons of SmallRig 2066B Arm

Pros

  • Dual ball heads give flexibility when aiming a monitor, light, or other small accessory.
  • Matching 1/4-inch screws at both ends suit rigs built around compatible threaded mounts.
  • The 9.8-inch length provides room to position an accessory away from the mounting point.
  • The rubber cushion can help limit direct contact between the screw and a monitor surface.

Consider before buying

  • The 213 g maximum weight recommendation rules it out for heavier accessories or setups that exceed that limit.
  • The arm requires a suitable 1/4-inch threaded support point; it does not include a clamp or cage.
  • A longer arm can take up more space around a compact rig, so check clearance and the accessory's final position before choosing it.

Who Should Buy SmallRig 2066B Arm?

Good fit

Consider the SmallRig 2066B if you already have a compatible 1/4-inch mounting point and want to angle a lightweight accessory with more reach than a very short arm provides.

The two ball heads are the central advantage: they give you more freedom to arrange a monitor or light around a camera setup without relying on a single straight orientation.

Before buying, compare the combined accessory weight with the 213 g maximum recommendation and check how the arm will attach at both ends.

A monitor or light that fits the threads still needs to stay within the stated limit, and the arm's length should work with your camera cage, handle, or other support without crowding controls.

Who should skip it

Skip this model if your accessory weighs more than 213 g, or if you need a clamp included to attach the arm to a desk, rod, or other surface.

It is also a poor match for a rig that uses a different connection at either end unless you already have a compatible adapter.

How the SmallRig 2066B Arm Fits a Camera Rig

Two ball heads for flexible placement

The 360-degree ball heads at both ends are intended to make angle adjustment a core part of the setup.

This can help when a monitor or light needs to sit off to one side or face a particular direction.

The arm's usefulness depends on tightening the joints securely for the chosen position; buyers should check the fit of their accessory and avoid exceeding the stated payload recommendation.

Thread compatibility shapes the setup

The 1/4-inch screws on both ends make the arm suitable for a direct connection between compatible threaded points. One end can attach to a support such as a cage or rail, while the other carries the accessory.

Since the arm itself is not described as including a clamp, buyers who need to grip a desk edge, tube, or stand should plan on a separate compatible support.

Reach comes with a payload limit

A 9.8-inch arm can move an accessory farther from its mounting point, which is useful when a monitor or light needs a different position around the camera.

That reach also makes it important to consider clearance and how the accessory will sit on the rig. The listed 213 g maximum recommendation is the practical boundary to check before choosing a longer placement.

A small contact detail for monitors

The rubber O-ring cushion on a screw is designed to reduce scratching and help the monitor connection lock more tightly.

It is a useful touch for a setup that uses a compatible monitor mount, though the buyer should still make sure the screw and threaded point engage correctly and that the accessory remains within the arm's weight recommendation.

Alternatives to SmallRig 2066B Arm

Camera Mounts & Clamps alternative

SmallRig 2732 Magic Arm Clamp Kit
4.6/5

3,000+ ratings

Read Amazon Reviews

SmallRig 2732 Magic Arm Clamp Kit

Choose the 2732 if you need a clamp to attach the arm to a compatible surface or want the clamp's additional threaded options.

The 2066B better suits a setup that already has a threaded support point and needs only the arm.

  • The 2732 includes a 9.8-inch articulating arm and a super clamp with 1/4-inch and 3/8-inch threads.
  • Its clamp opens from 15 mm to 54 mm, and the arm uses 1/4-inch screws at both ends.
  • The 2066B is a 9.8-inch double ball-head arm with 1/4-inch screws at both ends and a 213 g maximum weight recommendation; it does not include a clamp.

Camera Mounts & Clamps alternative

SmallRig 5.5-inch Adjustable Articulating Magic Arm
4.7/5

1,000+ ratings

Read Amazon Reviews

SmallRig 5.5-inch Adjustable Articulating Magic Arm

Consider the 5.5-inch model if you prefer a shorter arm and its stated load guidance fits your setup. The 2066B offers more reach, while its much lower listed maximum weight recommendation makes payload a key deciding factor.

  • This 5.5-inch arm also has dual 360-degree ball heads, 1/4-inch screws at both ends, and a rubber cushion. Its description gives a best weight load of 1.5 kg.
  • The 2066B provides 9.8 inches of reach and has a listed maximum weight recommendation of 213 g.

Is SmallRig 2066B Arm Worth It?

The SmallRig 2066B Adjustable Articulating Magic Arm is worth considering when a camera rig already has compatible 1/4-inch threaded mounts and you need flexible positioning for a lightweight accessory.

Its dual ball heads and 9.8-inch reach make it adaptable to different layouts.

Keep the 213 g maximum weight recommendation in view and confirm that both ends match your rig before buying.

If the accessory is heavier or you need a clamp as part of the mount, choose a setup whose documented design meets those needs.

Your review at a glance

SmallRig 2066B Adjustable Articulating Magic Arm
4.6/5

1,000+ ratings

Read Amazon Reviews

SmallRig 2066B Adjustable Articulating Magic Arm

A 9.8-inch dual ball-head arm for creators who need to position a lightweight monitor, light, or other 1/4-inch threaded accessory.

  • 9.8-inch articulating arm, model 2066B.
  • Dual ball-head design, with each head adjustable through 360 degrees.
  • 1/4-inch threaded screw on both ends for attaching compatible accessories and supports.
  • Rubber O-ring cushion at the 1/4-inch screw to help protect a monitor and secure the connection.

Written by

reesenewslab.org Editorial Team

Editorial team

Independent editorial coverage of journalism & media innovation.

Amazon customer reviews

See what buyers think

Explore customer reviews, photos and available video reviews on Amazon.

SmallRig 2066B Adjustable Articulating Magic Arm

SmallRig 2066B Adjustable Articulating Magic Arm

A 9.8-inch dual ball-head arm for creators who need to position a lightweight monitor, light, or other 1/4-inch threaded accessory.

  • 9.8-inch articulating arm, model 2066B.
  • Dual ball-head design, with each head adjustable through 360 degrees.
Check Video Reviews on Amazon