The SMALLRIG Universal Phone Holder Mount review is for creators who want to attach a smartphone to a camera or tripod and switch between portrait and landscape framing.
Its adjustable joints and top cold shoe suit compact filming setups, while its 500 g load limit makes it important to consider the combined weight of the mounted gear.
SMALLRIG Phone Mount Review Summary
The quick verdict

2,000+ ratings
Read Amazon ReviewsSMALLRIG Universal Phone Holder Mount
A flexible camera or tripod phone clamp for creators who want portrait and landscape framing plus a top cold shoe for an accessory.
- Fits smartphones 57–88 mm wide; check the measurement with any case or grip attached.
- Attaches to a camera or tripod using a bottom 1/4"-20 threaded hole or cold shoe.
- Top cold shoe provides a mounting point for a microphone or light.
- Supports landscape and portrait orientation, with a locking position when rotated 90 degrees.
Pros
- Offers both a bottom threaded connection and a bottom cold shoe for mounting.
- Adds a top cold shoe for a microphone or light without needing a separate accessory plate.
Consider before buying
- The 500 g maximum load requires buyers to account for the phone and any mounted accessories together.
- The clamp's fit depends on phone width, so a bulky case or attached grip should be measured before purchase.
Read the full review summary
The mount combines a spring-style phone clamp with several ways to connect it to a camera or tripod: a bottom 1/4"-20 threaded hole and a cold shoe.
A second cold shoe sits on top for a microphone or light, and additional threaded holes support compatible power bank holders.
Its two rotary joints offer up to 180 degrees of adjustment, and the phone can be rotated 90 degrees to switch orientation and lock in place.
It is best suited to someone who wants one compact holder for phone video, live streaming, interviews, or vlogging, and values flexible placement over a dedicated phone case.
The 57–88 mm width range covers many smartphones, but buyers should measure a phone with its case attached and check that the complete mounted setup stays within the 500 g capacity.
The buying factors
SMALLRIG Phone Mount Scorecard
Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.
Mounting flexibility
A bottom threaded hole, bottom cold shoe, top cold shoe, and multiple threaded holes support different mounting and accessory arrangements.
Framing adjustment
Two rotary joints allow angle adjustment, while the holder supports landscape and portrait orientations.
Phone compatibility
The 57–88 mm width range fits many phones, though the actual width with a case should be checked.
Accessory support
The top cold shoe accepts a microphone or light, and the threaded holes are designed to facilitate compatible power bank holders.
Load headroom
A 500 g maximum capacity calls for attention to the combined weight of the phone and any attached accessories.
Setup versatility
It can serve camera and tripod setups for several types of phone-based shooting, with orientation and angle changes built in.
Key Features and Specifications of SMALLRIG Phone Mount
- Fits smartphones 57–88 mm wide; check the measurement with any case or grip attached.
- Attaches to a camera or tripod using a bottom 1/4"-20 threaded hole or cold shoe.
- Top cold shoe provides a mounting point for a microphone or light.
- Supports landscape and portrait orientation, with a locking position when rotated 90 degrees.
- Two rotary joints allow up to 180 degrees of adjustment.
- Multiple threaded holes are designed to facilitate installation of compatible power bank holders.
- The stated maximum load capacity is 500 g; the included package is one phone holder.
Pros and Cons of SMALLRIG Phone Mount
Pros
- Offers both a bottom threaded connection and a bottom cold shoe for mounting.
- Adds a top cold shoe for a microphone or light without needing a separate accessory plate.
- Supports quick landscape-to-portrait reorientation and two-joint angle adjustment.
- Its 57–88 mm clamp range accommodates a broad range of phone widths.
Consider before buying
- The 500 g maximum load requires buyers to account for the phone and any mounted accessories together.
- The clamp's fit depends on phone width, so a bulky case or attached grip should be measured before purchase.
- The package includes the holder only, so a compatible camera or tripod and any desired accessories must be provided separately.
Who Should Buy SMALLRIG Phone Mount?
Good fit
Consider this mount if you regularly move a phone between camera or tripod setups and want portrait and landscape framing without changing holders.
The two joints give you additional angle options, while the bottom mounting choices let you work with either a 1/4"-20 connection or a cold shoe, depending on your setup.
It also makes sense for a compact video rig that needs a top cold shoe for a microphone or light.
Before buying, measure the phone at its widest point with the case or grip you plan to use, then total the phone and accessory weight to confirm it stays under the 500 g limit.
Who should skip it
Look for a different mount if your phone and accessories together exceed 500 g, or if you need a holder for a device wider than 88 mm or narrower than 57 mm.
This is not the right fit if you need a complete filming kit in one package: the included component is the phone holder, so check that you already have compatible mounting hardware and accessories.
How the SMALLRIG Phone Mount fits a compact filming rig
Mounting options for different rigs
The bottom 1/4"-20 threaded hole and cold shoe give the holder two connection routes, which can help it fit into more than one camera or tripod arrangement.
Check the receiver on your equipment before choosing a mounting method, and make sure the holder sits where you want it before tightening the rig.
Portrait and landscape framing
The mount supports both orientations and locks when rotated 90 degrees. This is useful when one setup serves vertical social video and horizontal interviews, while two rotary joints provide further angle adjustments.
For repeatable framing, consider whether the phone can reach the intended position without interfering with other equipment.
Accessory planning and weight
The top cold shoe is intended for a microphone or light, and the multiple threaded holes are designed to facilitate compatible power bank holders.
Because the maximum load is 500 g, include the phone and every mounted accessory when checking your setup; adding hardware uses some of that capacity.
Checking the phone fit
The specified width range is 57–88 mm. A phone that fits without a case may measure differently with a protective case or grip, so check the complete device configuration you plan to clamp.
This simple measurement helps avoid buying a holder that cannot accommodate your usual setup.
Alternatives to SMALLRIG Phone Mount
Cell Phone Camera Mounts alternative

700+ ratings
Read Amazon ReviewsSMALLRIG Magnetic Metal Phone Mount with Cold Shoe Mount
Choose the clamp model if you want a width-based holder that can fit a range of phones and value having both bottom mounting options.
The magnetic model may suit a MagSafe-compatible iPhone setup where its magnetic attachment and detachable accessory plate are useful; its description also cautions that external impacts may cause the device to detach.
- The Magnetic Metal Phone Mount is designed for iPhone models with MagSafe functionality, uses two rotating shafts, and includes a detachable top round plate that can serve as a mounting plate for accessories.
- Its stated load capacity is also 500 g.
- The Universal Phone Holder uses a 57–88 mm clamp, offers both a bottom threaded hole and bottom cold shoe, and supports landscape and portrait positioning with two rotary joints.
Is SMALLRIG Phone Mount Worth It?
The SMALLRIG Universal Phone Holder Mount is worth considering for phone-based filming setups that need adjustable framing, portrait and landscape orientation, and a cold shoe for a microphone or light.
Its combination of bottom mounting options makes it adaptable to camera and tripod arrangements.
Check phone width with its case and keep the complete load below 500 g before choosing it.
If your setup fits those limits and benefits from the holder's connection options, it is a practical candidate; for a MagSafe-based iPhone workflow, compare the magnetic alternative's distinct attachment and accessory-plate design.
Your review at a glance

2,000+ ratings
Read Amazon ReviewsSMALLRIG Universal Phone Holder Mount
A flexible camera or tripod phone clamp for creators who want portrait and landscape framing plus a top cold shoe for an accessory.
- Fits smartphones 57–88 mm wide; check the measurement with any case or grip attached.
- Attaches to a camera or tripod using a bottom 1/4"-20 threaded hole or cold shoe.
- Top cold shoe provides a mounting point for a microphone or light.
- Supports landscape and portrait orientation, with a locking position when rotated 90 degrees.